Cal Lab Labmaster high precision length measuring system

High Precision Length Measuring System!

Our gage calibration laboratory utilizes the Pratt & Whitney LabMaster^® Universal. This state-of-the-art instrument incorporates an uncertainty to 2 millionths of an inch (0.05 micron), its suitable for virtually all ID and OD applications.

High accuracy is maintained by its laser interferometer, zero Abbe offset design, and large measuring table with center position, pitch, and yaw controls. The computer-controlled precision air bearing slide and gaging fingers remove operator-influenced errors commonly observed with traditional gaging methods by maintaining constant force. It also greatly minimizes ‘wear and tear’ to both the measuring standards and the instrument under test.

Labmaster gauge block calibration ring gauge calibration

Our LabMaster Universal Measures:

Measuring gage blocks
End standards
Plain rings
Threaded rings & plugs
Pin & plug gages
Tapered plugs
Cylindrical setting gages
Micrometers
Indicators
LVDTs
Calipers
Snap gages
Length
Inside, outside and pitch diameter
Linear displacement
Thickness

Model	Labmaster Universal
Table Axes of Motion	Elevation, Center, Tilt and Swivel
Accuracy	2 + 0.5L µinch	0.05 + 0.5L µm
Repeatability	1.6 µinch	0.04 µm
Measurement Range: Internal	0.02 to 14 inches	0.5 to 356 mm
Measurement Range: External	0 to 13 inches	0 to 330 mm
Direct Reading Range	7 inch	175 mm